Descrição do produto

SPARTUS XPro MIG 350 Dual Pulse
– estabilidade industrial e controle total de processos em uma forma moderna

SPARTUS XPro MIG 350 Dual Pulse é uma moderna máquina de soldagem MIG/MAG com inversor projetada para usuários que esperam alto desempenho, arco estável e máximo controle sobre o processo de soldagem. Fonte de alimentação trifásica de 400V, corrente máxima de soldagem de 350A e ciclo de trabalho de 60% fornecem uma reserva de energia adequada para aplicações exigentes de oficina, produção e montagem.

A máquina suporta processos MIG/MAG nos modos manual, sinérgico, Pulse e Dual Pulse, além de TIG Lift e MMA. Como resultado, o XPro MIG 350DP tem bom desempenho tanto na soldagem convencional de aço estrutural quanto em aplicações mais exigentes envolvendo aço inoxidável ou alumínio, onde o controle de energia de arco e a estética da solda são cruciais.

Soldagem MIG/MAG – maior controle, melhor qualidade de solda

A principal área de trabalho do SPARTUS XPro MIG 350 Dual Pulse é o avançado processo MIG/MAG, projetado para orientação estável por arco, configuração rápida e alta repetibilidade dos resultados. O operador pode trabalhar em modo manual, que oferece total liberdade de configuração, ou usar programas sinérgicos, que selecionam automaticamente parâmetros de acordo com o tipo de material, diâmetro do fio e gás de blindagem.

Uma vantagem chave da máquina é a capacidade de funcionar nos modos Pulso e Pulso Duplo. A tecnologia de pulsos permite controle preciso da quantidade de energia introduzida no material, resultando em um arco mais estável, redução de respingos e melhor controle da piscina de soldagem. O Dual Pulse também possibilita alcançar uma estrutura de solda característica e estética, semelhante à soldagem TIG, mantendo a alta eficiência do processo MIG/MAG. Essa solução é particularmente eficaz na soldagem de alumínio e aço inoxidável, onde limitar o superaquecimento do material e controlar a distorção são cruciais para a qualidade do resultado final. O ajuste dos parâmetros do pulso, frequência do pulso e corrente base permite que as características de soldagem sejam precisamente ajustadas ao tipo de material e aos requisitos tecnológicos.

A máquina oferece modos avançados de operação com maçarico: 2T, 4T, S2T, S4T e SPOT. Os modos clássicos 2T e 4T facilitam a adaptação da operação a soldas curtas ou longas, enquanto os modos estendidos S2T e S4T permitem o controle sobre o início e o fim do processo. Isso permite ao operador gerenciar com precisão a ignição por arco, corrente inicial, parâmetros finais e o preenchimento da cratera de solda.

O modo SPOT permite soldas por pontos repetíveis, aumentando a precisão ao trabalhar em componentes que exigem controle de tempo de solda. O ajuste de indutância permite que as características do arco sejam adaptadas ao material e à posição de soldagem — de um arco mais suave para um mais dinâmico e concentrado. Na prática, isso significa melhor controle de penetração, redução de respingos e maior estabilidade do processo.

O SPARTUS XPro MIG 350DP também oferece controle detalhado sobre a sequência de soldagem. O operador pode ajustar parâmetros como gás pré-fluxo e pós-fluxo, Soft Start, parâmetros de início e fim do arco e Burn Back, que garante a correta conclusão da alimentação por fio. A função Slow Feed oferece um arranque controlado por fio, melhorando a estabilidade da ignição e o conforto de funcionamento.

Programas sinérgicos

O SPARTUS XPro MIG 350 Dual Pulse oferece programas sinérgicos para os materiais e aplicações mais comumente utilizados. A máquina permite trabalhar, entre outros, com aço macio, aço inoxidável, alumínio e fios com núcleo de fluxo autoblindados. Graças à sinergia, o operador pode começar a trabalhar mais rápido e então ajustar os parâmetros de acordo com sua própria experiência e os requisitos de uma junta específica. Ele combina configurações automatizadas com controle consciente do processo.

Built-in 4-roll wire feeder

Stable wire feeding is crucial for MIG/MAG welding quality. SPARTUS XPro MIG 350 Dual Pulse is equipped with a built-in four-roll wire feeder, which ensures smooth and even feeding of the filler material.

The feeder is located inside the housing and features a practical inspection window and internal lighting, making it easier to check the spool, wire routing and roller settings. This is particularly useful during wire replacement, work in poorly lit areas and quick workstation checks before welding. In addition, the space for spare rollers in the feeder provides convenient access to the most commonly used accessories without the need to organise additional workspace.

The machine is also compatible with a Spool Gun, which increases the possibilities of working with soft wires, especially aluminium. This solution improves feeding stability and reduces problems resulting from guiding soft wire over a longer distance.

Electromagnetic compatibility (EMC) 

SPARTUS XPro MIG 350 Dual Pulse is characterised by high electromagnetic compatibility (EMC), ensuring stable operation without interference in demanding industrial environments. The machine has been designed so as not to affect the operation of other machines and control systems, while maintaining resistance to external interference. This ensures reliable operation in environments with automation systems, robots and modern production installations.

20 memory channels – repeatability without wasting time

The machine offers 20 memory channels, allowing users to save their own welding parameter settings. This is a major advantage when working with repeatable components, different materials or fixed production tasks. The operator can save proven configurations and quickly return to them without having to set all parameters again. The result is shorter preparation time, lower risk of error and higher process repeatability.

Comfortable operation and clear LCD panel

A modern control panel with a clear LCD display provides quick access to the most important functions and parameters. The interface guides the user through process selection, material type, wire diameter and additional settings, making operation intuitive even with the machine’s extensive capabilities.
During welding, key operating parameters are displayed on the screen, allowing the process to be monitored continuously and quickly adjusted to the requirements of a specific task.

TIG Lift Pulse - advanced parameter control

SPARTUS XPro MIG 350 Dual Pulse is not limited to MIG/MAG welding only. TIG Lift mode enables precise TIG DC welding with touch arc ignition, without the use of high-frequency HF. It is a practical solution wherever greater process control and high weld aesthetics are important.

However, the XPro MIG series takes TIG Lift capabilities one step further. The machine is equipped with an advanced TIG Lift Pulse function with pulse mode operation and access to extended welding process sequence settings, including pulse frequency and pulse width adjustment. This solution allows even more precise control of the welding arc, heat input and weld characteristics, which will be particularly appreciated by users working with thinner materials or demanding details.

In addition to standard support for TIG torches with a valve, SPARTUS XPro MIG 350 Dual Pulse also enables operation with TIG torches equipped with handle control and a EURO connector. This allows the operator to conveniently control the welding process without taking their hand off the torch, significantly increasing working comfort and ergonomics. In this option, in addition to 2T and 4T modes, the machine also offers 8T mode, enabling an extended torch control cycle. This solution improves the operation of a multi-stage welding process and reduces the need to continuously hold the torch button, increasing operator comfort.

MMA Pulse and intelligent process control

SPARTUS XPro MIG 350 Dual Pulse offers an advanced MMA Pulse process, providing even greater control over the welding arc, stable operation and better adjustment of welding characteristics to working conditions and operator preferences. In addition, the machine is equipped with functions that support working comfort and quality, such as: Hot Start - which makes electrode ignition easier,  Arc Force - which stabilises the arc during welding, and  VRD - which increases safety by reducing open-circuit voltage.

The XPro MIG series additionally offers two advanced MMA characteristic modes: constant current and constant power.

MMA Constant Current — stable and predictable arc
In MMA Constant Current mode, the machine maintains a stable welding current value regardless of changes in arc length or working conditions. This solution ensures high process stability, makes electrode handling easier and allows repeatable weld quality to be achieved. Automatic maintenance of the set current value reduces the need for continuous parameter correction by the operator, increasing working comfort and making it easier to control the welding process.

MMA Constant Power — intelligent parameter adjustment
MMA Constant Power mode dynamically regulates output voltage and current to maintain constant welding power. As a result, the machine automatically adjusts its operating characteristics to changes in arc length and process conditions. This solution increases welding stability, simplifies operation and allows working parameters to be adapted more quickly to different materials and welding positions. The operator sets the expected power, and the machine automatically optimises the remaining process parameters.

Stable trolley and work-ready design

SPARTUS XPro MIG 350 Dual Pulse is mounted on a stable transport trolley with space for a gas cylinder. This design makes it easier to organise the workstation, move the machine and work in different parts of a workshop or production hall.
IP23S protection rating increases the machine’s resistance to demanding operating conditions, while the robust housing and well-thought-out layout of components make the XPro MIG 350DP ready for intensive everyday use.
An additional advantage of the machine is the intelligent cooling control system (Fan Stop), which activates the fan only when necessary. This results in quieter operation, reduced intake of contaminants and extended component service life.

Greater working range, fewer limitations

A well-thought-out cable configuration – 3-metre welding torch, ground cable and power cable – provides real freedom of work on large components and reduces the need to frequently reposition the machine. The 3-metre gas hose with quick connector speeds up connection and improves workstation organisation, resulting in greater work efficiency.

Technology designed for efficient and repeatable work

SPARTUS XPro MIG 350 Dual Pulse is a MIG/MAG welding machine for users who expect not only efficiency, but also full process control and high weld quality. The combination of Dual Pulse technology, extensive synergy, a stable 4-roll feeder and advanced MIG/MAG settings makes the machine ideal for both everyday workshop use and demanding production applications.

É uma solução criada para trabalhos onde estabilidade, estética da solda e repetibilidade de cada junta subsequente são importantes.